Sony PCS-TL33 User Manual

Page of 129
45
Setting Up the Network Configurations
  C
h
ap
te
r 2
  
Re
gi
s
tra
tion and 
S
e
tu
p
The setting has been configured properly if the correct 
IP address appears in the launcher menu and 
“Registration Confirmed” appears under 
“Gatekeeper” in Page 3/4 of the Status & Info menu.
The information that appears in the launcher menu 
may differ depending on the “Number Display” setting 
in the Device Setup menu. You can also click the 
Number Display portion and select the information to 
display from a list.
To conduct a video conference
Select “IP” for the line interface, enter the user alias or user 
number set by the remote party in the number entry text 
box, and dial.
You can set “IP” as the default line interface selection for 
the launcher menu by setting “Line I/F” to “IP” in the Dial 
settings of the Communication Mode menu.
LAN (Connecting Through NAT)
Connection using NAT allows one IP address to be shared 
by several computers on the same LAN. This section 
describes how to set up videoconferences conducted in 
NAT and global IP environments. 
Configuration example
1
Enter a name in “Host Name” under Page 1/3 of the 
LAN Setup menu, set the “DHCP Mode” to “Off“, and 
enter the appropriate values for “IP Address”, 
“Network Mask”, and “Gateway Address”.
2
Set “NAT Mode” to “On” under Page 2/3 of the LAN 
Setup menu, and enter the appropriate IP address in 
“WAP IP Address”.
3
Remote parties must configure Page 1/3 of the LAN 
Setup menu in the same way.
If the remote parties are not in a NAT environment, 
NAT settings in the LAN Setup menu must be 
configured.
To conduct a video conference
Select “IP” for the line interface, enter the remote party’s 
IP address in the text box, and dial.
You can set “IP” as the default line interface selection for 
the launcher menu by setting “Line I/F” to “IP” in the Dial 
settings of the Communication Mode menu.
When using the terminal in the NAT environment, you can 
connect to a remote party (global IP), but for a remote 
Note
Gatekeeper Mode
On
Gatekeeper Address
User Alias
User Number
Administrator Setup
Right-click the mouse to display a help message.
Cancel
OK
192.100.10.20
PCS-A
100
IP:192.100.10.10
2/11
Internet
Router
Router
210.20.20.2
(Global address)
192.168.10.1
210.20.20.1
192.168.10.10
Note
Note
LAN
SIP
LAN
Right-click the mouse to display a help message.
Cancel
OK
Auto
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Off
VCT1
192.100.10.10
255.255.255.0
192.100.10.1
IP:192.168.10.10
1/3
On
210.10.10.1
Default
NAT Mode
WAN IP Address
Port Number Used 
TCP Port Number
UDP Port Number
LAN
SIP
LAN
Right-click the mouse to display a help message.
Cancel
OK
IP:192.168.10.10
2/3