Sony PCS-TL33 User Manual

47

Setting Up the Network Configurations

  C
h

ap
te

r 2

  

Re
gi

s

tra

tion and 

S

e

tu

p

When using PPPoE, you can connect via LAN without a 
router.
A modem (using bridge mode) is required when using 
FLET’S ADSL.

Set “PPPoE” to “On” under Page 9/11 of the 
Administrator Setup menu, and enter the PPPoE user 
name and PPPoE password given to you by the 
provider.

If you have a fixed IP from the provider, set “Fixed IP 
for PPPoE” to “On”, and enter your fixed IP address 
for PPPoE in “Fixed IP Address for PPPoE”.

The setting has been configured properly if the correct 
IP address appears in the launcher menu.

• If the fixed DNS server address is specified by the 

provider, set “PPPoE DNS” to “Specify”, and enter 
the specific addresses in “Primary DNS” and 
“Secondary DNS”.

• The information that appears in the launcher menu 

may differ depending on the “Number Display” 
setting in the Device Setup menu. You can also click 
the Number Display portion and select the 
information to display from a list.

Remote parties must configure in the same way.

Select “IP” for the line interface, enter the remote party’s 
IP address in the text box, and dial.
You can set “IP” as the default line interface selection for 
the launcher menu by setting “Line I/F” to “IP” in the Dial 
settings of the Communication Mode menu.

ONU

211.10.10.10

B FLET’S

210.10.10.10

Local IP 
network

Internet

ONU

On

Off

Obtain Automatically

On

Off

PPPoE

PPPoE User Name

PPPoE Password

Fixed IP for PPPoE

Fixed IP Address for PPPoE

PPPoE DNS

Primary DNS

Secondary DNS

Administrator Setup

Right-click the mouse to display a help message.

9/11

1234567890

210.10.10.10

abc@example.com