Yamaha RX-Z11 User Manual

y
• If you connect two video monitors to the HDMI OUT jacks of this 

unit, press CHDMI OUT repeatedly to select the active video 
monitor.

• You can control this unit by using the graphical user interface (GUI) 

screen. See page 57 for details.

• You can turn on or off the short message displays in the video 

monitor. See page 108 for details.

Rotate the D

INPUT selector (or press one of the 

input selector buttons (3)) to select the desired 
input source.

The name of the currently selected input source appears in the 
front panel display and in the short message display for a few 
seconds.

Start playback on the selected source component or 
select a broadcast station.
• Refer to the instruction manuals for the source component.
• See page 68 for details about FM/AM tuning instructions.
• (U.S.A. and Canada models only) See page 74 for details 

about XM Satellite Radio tuning instruction.

• See page 78 for details about the iPod operation with this 

unit.

• See page 80 for details about playback of Internet Radio 

programs and the music contents in the PC or USB storage 
devices.

Rotate E

VOLUME (or press JVOLUME +/–) to 

adjust the volume to the desired output level.
Control range: Mute, –80.0 dB (minimum) to 

+16.5 dB (maximum)

y
See page 65 to adjust the level of each speaker.

Rotate the M

PROGRAM selector (or press one of 

the sound field program selector buttons (Q) 
repeatedly) to select the desired sound field 
program.
The name of the selected sound field program appears in the 
front panel display and in the short message display. See 
page 58 for details about sound field programs.

• Sound field programs cannot be selected when the component 

connected to the MULTI CH INPUT jacks is selected as the input 
source (see page 54).

• Press 

HSTRAIGHT and the rotate MPROGRAM to select the 

desired sound field program when “TUNER” or “XM” (U.S.A. and 
Canada models only) is selected as the input source.

y
• Choose a sound field program based on your listening preference, not 

merely on the name of the program.

• When you select an input source, this unit automatically selects the 

last sound field program used with the corresponding input source.

Use this feature to select the component connected to the MULTI 
CH INPUT jacks (see page 37) as the input source.

Rotate the D

INPUT selector (or press 3MULTI) to 

y
Use “MULTI CH” menu in “Input Select” to set the parameters for MULTI 
CH (see page 98).

Sound field programs cannot be selected when the component connected to 
the MULTI CH INPUT jacks is selected as the input source (see page 58).

Caution
Extreme caution should be exercised when you play back CDs 
encoded in DTS. If you play back a CD encoded in DTS on a 
DTS-incompatible CD player, you will only hear some 
unwanted noise that may damage your speakers. Check whether 
your CD player supports CDs encoded in DTS. Also, check the 
sound output level of your CD player before you play back a CD 
encoded in DTS.

y
To play DTS-encoded CDs when using a digital audio connection, set 
“Decoder Mode” in “Input Select” to “DTS” before playback (see 
page 97).

Before performing the following operations, set the operation mode 
selector on the remote control to FAMP.

D V D

M o v i e

S c i - F i