Yamaha RX-Z11 User Manual

Use this feature to select the HDMI OUT jack to output the input 
signals.

Press C

HDMI OUT on the remote control repeatedly to 

select the desired setting of “HDMI OUT SEL”.
Each time you press CHDMI OUT, the front panel display changes 
as shown below.

Use this feature to turn the front speaker system (FRONT A and/or 
FRONT B) on or off.

Press G

SPEAKERS A and/or GSPEAKERS B on the 

Turn off the volume level of this unit when you switch the front speaker 
setting.

■ Using the Zone B feature

When you set “Speaker B” to “ZoneB” (see page 109), you can use 
the speakers connected to the EXTRA SP speaker terminals in 
another room (Zone B).

G

SPEAKERS B on the front panel repeatedly to 

turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in the main 
room are muted. 

You cannot activate both the main room and Zone B speakers 
simultaneously.

y
When you select a sound field program, the SILENT CINEMA mode 
activates automatically (see page 64).

• When you connect headphones, no signals are output at the speaker 

terminals.

• All digital multi-channel audio signals (except DSD signals) are mixed 

down to the left and right headphone channels.

• If you connect or disconnect your headphones to or from this unit in the 

party mode, the sounds in the zones that join in the party mode are muted 
for a moment.

You can combine a video image from a video source with sound 
from an audio source. For example, you can enjoy listening to 
classical music while viewing beautiful scenery from the video 
source in the video monitor.

Press the input selector buttons (3) to select a video 
source and then an audio source.

y
Set the “BGV” parameter in the “MULTI CH” menu to the desired setting to 
select the default background video input source of the MULTI CH INPUT 
sources (see page 98).

Outputs the signals at the HDMI OUT 1 jack.

Outputs the signals at the HDMI OUT 2 jack.

Does not output any signals at the HDMI OUT 1 and 2 
jacks. Select this setting when you do not use the video 
monitor connected to one of the HDMI OUT jacks.