Yamaha RX-Z11 User Manual

This unit comes with a variety of input jacks. Use this feature (audio 
input jack select) to switch the input jack assigned to an input 
source when more than one jacks are assigned to an input source.

y
• We recommend setting the audio input jack select to “AUTO” in most 

cases.

• You can adjust the default the audio input jack select of this unit by using 

“Audio Select” in “Option” (see page 112).

• You can also set the audio input jack select setting in “Audio Select” in 

“Input Select” (see page 97).

Rotate the D

INPUT selector (or press one of the 

input selector buttons (3)) to select the desired 
input source.

Press F

AUDIO SELECT (or OAUDIO SEL) 

This feature is not available when no digital input jack (OPTICAL, 
COAXIAL and HDMI) are assigned. Use “I/O Assignment” in “Input 
Select” to reassign the respective input jack (see page 96).

Press L

MUTE on the remote control to mute the audio 

output. Press L

MUTE again to resume the audio output.

“VOLUME” flashes in the front panel display when the audio 
output is muted.

y
• You can also rotate EVOLUME on the front panel or press JVOLUME 

+/– on the remote control to resume the audio output.

• You can adjust the muting level by using the “Muting Type” parameter in 

“Volume” (see page 103).

Use this feature to automatically set the main zone to the standby 
mode after a certain amount of time. The sleep timer is useful when 
you are going to sleep while this unit is playing or recording a 
source. The sleep timer also automatically turns off any external 
components connected to the AC OUTLET(S) (see page 42).

Press one of the input selector buttons (3) on the 
remote control to select the desired input source.

Start playback on the selected source component or 
select a broadcast station.
Refer to the operating instructions for the source component.
See page 68 for details about tuning instructions.

Press C

SLEEP repeatedly to set the amount of time.

Each time you press CSLEEP, the front panel display 
changes as shown below.

The SLEEP indicator flashes while you are switching the 
amount of time for the sleep timer. Once the sleep timer is set, 
the SLEEP indicator lights up in the front panel display, and 
the display returns to the selected sound field program.

■ Canceling the sleep timer

Press C

SLEEP repeatedly until “OFF” appears in the 

The SLEEP indicator turns off, and “OFF” disappears from the 
front panel display after a few seconds.

y
• The sleep timer setting can also be canceled by pressing AMAIN ZONE 

ON/OFF (or DSTANDBY) to set the main zone to the standby mode.

• You can also set the sleep timer for Zone 2, Zone 3, or Zone 4. See 

page 140 for details.

Automatically selects input signals in the following 
order:
(1) HDMI
(2) Digital signals
(3) Analog signals

Selects only HDMI signals. When HDMI signals are not 
input, no sound is output.

Automatically selects input signals in the following 
order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.

Selects only analog signals. If no analog signals are 
input, no sound is output.

A . S E L :

A U T O

S L E E P

1 2 0 m i n .

S T R A I G H T

S L E E P

O F F