Cuisinart B70 User Manual

8

9

  c.

  Once size is chosen, press BREW Button. 

BREW Button will stop flashing, Left and Right 
Buttons will no longer be lit and icon  
of brew size will be lit.

 7.

  The LCD Control Center will now indicate 
“BREWING” and the cup size you selected will 

be illuminated on the LCD Control Center  
(fig. 8). CAUTION: There is extremely hot water 
in the K-Cup

®

 Pack Holder during the brew 

process. To avoid risk of injury, do not lift the 
Handle or open the K-Cup

®

 Pack Assembly 

Housing during the brew process.

 8.

  There may be a short pause prior to coffee  

being dispensed. The entire brew process  
lasts for approximately 1 minute and ends  
with a burst of air to remove all liquid from  
the K-Cup

®

 pack.

 9.

  Lift the Handle, 

remove and dispose of 
the used K-Cup

®

 pack. 

CAUTION: K-Cup

®

 

pack will be hot.

 10.

 Enjoy your first cup  

of Keurig Brewed

®

  

gourmet coffee, tea  
or hot cocoa!

 11.

 Your Brewer may indicate “NOT READY” as it heats water for the next 

brew cycle. The “READY TO BREW” indication will return to the LCD 
Control Center in about 15 seconds. 

If you need to stop the brewing after the process has started, press and 
release the Power Switch to turn the Brewer “OFF.” The flow of coffee, tea 

or hot cocoa will stop, the heating element will shut off and the blue lights 

illuminating the LCD Control Center and Water Reservoir will disappear. 
NOTE: You may get more coffee, tea or hot cocoa in your cup during your next 
brew. We recommend that you perform a cleansing brew after a terminated 
brew. Then your NEXT brew will be the volume you have selected.

The LCD Control Center will indicate “ADD 

WATER” when the water level in the tank is  
low or if the Water Reservoir has been removed 
(fig. 9). The blue light in the Water Reservoir will 
also blink when water needs to be added. The 
Brewer will not allow you to brew when “ADD 
WATER” is indicated (fig. 9). 

SECTION 1

Set-Up & First Brew (continued)

The Water Reservoir can be filled in two ways. 

 1. 

Open the Easy-Fill Lid and pour water directly into the Water Reservoir  

while it is still attached to the Brewer, then close the Lid. The entire  
Water Reservoir Lid may be removed completely, if preferred.

 2.

  Remove the Water Reservoir from Brewer by first removing Lid from the 

Water Reservoir, then lifting the Water Reservoir straight up and toward 
front of Brewer. Fill with water. Place the Water Reservoir back on the 
Brewer and replace the Lid. IMPORTANT: Do not remove the Water 
Reservoir during the brewing process.

Your iced tea and iced coffee taste best when fresh-brewed hot over ice. 

Try it by placing a tall cup filled with ice on the Drip Tray Plate (the Drip Tray 

Assembly can be removed to accommodate taller cups), choose your favorite 
K-Cup

®

 pack, select the brew size and press the BREW Button. Also, look for 

the Brew Over Ice

™

 icon on K-Cup

®

 packs specially crafted to brew over ice! 

IMPORTANT: Do not brew into a cup made of glass. Doing so may cause the  

glass to crack or break.

Your Brewer is able to produce hot water for making hot cocoa from a packet,  

for use in cooking, for making soups, etc. Simply follow the instructions on  
page 7 — “Ready To Brew Your First Cup” without adding a K-Cup

®

 pack. 

NOTE: After brewing a hot cocoa K-Cup

®

 pack, we recommend running a 

cleansing brew without a K-Cup

®

 pack.

If your Brewer has not been used for more than one week, you should purge 
the water from the inner tank.

 1.

  If there is water in the Water Reservoir, remove the Lid, then lift the  

Water Reservoir straight up and away from Brewer. Discard water, rinse 
and refill with water. Place the Water Reservoir back on the Brewer and 
replace the Lid. (If there is no water in the Water Reservoir, simply refill.)

 2.

  Be sure the Brewer is turned on. Raise and lower the Handle on the 

Brewer without inserting a K-Cup

®

 pack.

 3.

  The LCD Control Center will indicate “READY TO BREW.” Brew a Travel 

Mug (11.25 oz. serving) of water (do not use a K-Cup

®

 pack). 

 4.

  Repeat steps 2 and 3 two more times to completely purge water from  

inner tank.

If you are experiencing any problems with your Brewer, please contact  
Customer Service at 1.866.901.BREW (2739).

 

(5.25 oz.) 

(7.25 oz.)

(9.25 oz.) 

(11.25 oz.)

(3.25 oz.)