DeLonghi 10.13 User Manual

10

•   release the main switch at the side of the appliance (fig. 

2). 

Never press the main switch while the appliance is on.

When you access the programming menu by pressing the 

MENU/ESC button, the following menu items are available: 

Use this function to deliver hot water from the spout to heat 

the internal circuit and make the coffee delivered hotter. 

To enable the function, proceed as follows:

1.   Press the MENU/ESC button to enter the menu; 

2.   Press the HOT MILK or LATTE button (fig. 8) until “Rins-

ing” is displayed; 

3.  Press the 

button. The message “Confirm?” is dis-

played; 

4.  Press the

(fig. 3): after a few seconds, hot water 

flows out of the spout, heating the internal circuit and ma-

king the coffee delivered hotter.

Press any button to stop hot water delivery at any time.

Descale
For instructions on descaling, see page 17.

Install filter
For instructions on how to install the filter, see the section 
“Installing the filter (page 18). 

Replacing the filter
For instructions on how to replace the filter, see the section 
“Replacing the filter” (page 19). 

Adjust time
To adjust the time on the display, proceed as follows:

1.   Press the MENU/ESC button to enter the menu;

2.  Press the HOT MILK or LATTE button (fig. 8) until “Adjust 

time” is displayed;

3.   Press the 

 button (fig. 3);

4.   Press the HOT MILK or LATTE button (fig. 8) to change 

the hours;

5.   Press the  

button to confirm;

6.   Press the HOT MILK or LATTE button (fig. 8) to change 

the minutes;

7.   Press the  

button to confirm.

This sets the time. Press the MENU/ESC button to exit the 
menu.

Auto-start
You can set the auto-start time in order to have the appliance 
ready at a certain time (for example in the morning) so you can 
make coffee immediately. 

To enable this function, the time must already have been set 
correctly. 
To enable Auto-on, proceed as follows:
1.   Press the MENU/ESC button to enter the menu;
2.   Press the HOT MILK or LATTE button (fig. 8) until “Au-

to-start” is displayed; 

3.   Press the 

button.  “Enable?” is displayed; 

4.  Press the 

 button to confirm; 

5.   Press the HOT MILK or LATTE button to choose the hours;
6.   Press the 

 button to confirm; 

7.   Press the HOT MILK or LATTE button (fig. 8) to change 

the minutes;

8.   Press the 

button to confirm; 

9.   Press the MENU/ESC button to exit the menu.
Once the time has been confirmed, enabling of auto-start is in-
dicated by the 

  symbol displayed alongside the time and 

under the Auto-start item in the menu. 
To disable the function:
1.  Select auto-start from the menu;
2.  Press the  

 button. “Disable?” is displayed;  

3.  Press the  

button to confirm.  

The 

 symbol is no longer displayed. 

Auto-Off
The time can be changed so that the appliance switches off 
after 15 or 30 minutes, or after 1, 2 or 3 hours. 
To re-programme Auto-off, proceed as follows:
1.   Press the MENU/ESC  button to enter the menu;
2.  Press the HOT MILK or LATTE button (fig. 8) until “Au-

to-off” is displayed;

3.   Press the 

  button;  

4.  Press the HOT MILK or LATTE button (fig. 8) until the de-

sired operation time is displayed (15 or 30 minutes, or 1, 2 
or 3 hours);

5.  Press the 

button to confirm;  

6.  Press the MENU/ESC  button to exit the menu. 
Auto-off is programmed. 

Cup warmer
This function enables or disables the cup warmer.  
Proceed as follows:
1.  Press the MENU/ESC button to enter the menu;
2.  Press the HOT MILK or LATTE button (fig. 8) until “Cup 

warmer” appears on the display;