DeLonghi 10.13 User Manual

12

5.   Press the 

 button to confirm and exit. 

Statistics function
This displays statistics relating to the machine.  
To display, proceed as follows:
1.   Press the MENU/ESC button to enter the menu;
2.  Press the HOT MILK or LATTE button (fig. 8) until “Statis-

tics” is displayed;

3.  Press the 

 button;

4.  Press the HOT MILK or LATTE button (fig. 8) to verify:
-  how many coffees have been made;
-  the total number of cappuccinos and milk based coffees 

made;

-  the total number of litres of water delivered;
-  how many times the machine has been descaled;
-  how many times the water softener filter has been re-

placed. 

5.  Press the MENU/ESC button twice to exit the menu.

Selecting the coffee taste
he appliance is set by default to make coffee with a standard 
taste. 
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the

 button (fig. 9) repeat-

edly until the required taste is displayed. 

Selecting the quantity of coffee in the cup 
The appliance is set by default to make a standard quantity of 
coffee. To select the quantity of coffee, press the

 

button (fig. 10) until the message corresponding to the 
required quantity of coffee is displayed:

MY COFFEE

Programmable: 

 from 

≃20 to ≃180

SHORT 

≃40

STANDARD

≃60

LONG

≃90

EXTRA LONG 

≃120

Customising the “my coffee” quantity 
The appliance is set by default to automatically deliver 30 ml 
of “my coffee”. 

To modify this quantity, proceed as follows:
1.  Place a cup under the coffee spouts (fig. 14).
2.  Press the 

 button (fig. 10) until “MY COFFEE” 

is displayed.    

3.  Keep the 

 button (fig. 11) pressed until the message 

“1 MY COFFEE Program quantity” is displayed and coffee 
delivery begins. Release the button.  

4.  As soon as the coffee in the cup reaches the required level, 

press the button

 (fig. 11) again.    

The quantity of coffee in the cup has now been programmed.

Adjusting the coffee mill
The coffee mill is preset in the factory to make coffee correctly 
and should not require adjusting initially. 
However, if after making the first few coffees you find that the 
coffee is too thin and not creamy enough or that delivery is too 
slow (a drop at a time), this can be corrected by adjusting the 
grinding adjustment dial (fig. 12).

The grinding adjustment dial must only be turned when the 
coffee mill is in operation.

If the coffee is delivered too slowly or 
not at all, turn one click clockwise to-
wards “7”. 
For fuller bodied creamier coffee on the 
other hand, turn one click anticlockwise 
towards “1” (do not turn more than one 

click at a time otherwise the coffee could be delivered a drop 
at a time).  
These adjustments will only be evident after at least 2 cups of 
coffee have been delivered. 
If this adjustment does not obtain the desired result, turn the 
dial another click. 

Tips for a hotter coffee
For a hotter coffee, before delivery you are recommended to:
•  perform a rinse cycle by selecting the “Rinsing” function in 

the settings menu (page 10)

•  warm  the  cups  with  hot  water  (using  the  hot  water

function); 

•  increase  the  coffee  temperature  in  the  settings  menu

(page 11).

Do not use caramelised or candied coffee beans as they could 
stick to the coffee mill and make it unusable. 

1.  Place coffee beans in the coffee bean container (fig. 13).