Mitsubishi Electronics MR-J3-T User Manual
3
First Functional Test
The wiring diagram below (Fig. 3-1) shows the minimum connections that you must make to test
an MR-J3-T series amplifier with the MR Configurator setup software. In test mode you can
check whether all the components are working properly.
an MR-J3-T series amplifier with the MR Configurator setup software. In test mode you can
check whether all the components are working properly.
NOTE
You can also use the optional MR-PRU-03 HMI control terminal for performing initial tests
and setting the amplifier’s parameters. For further details see the MR-J3-T series instruction
manual.
and setting the amplifier’s parameters. For further details see the MR-J3-T series instruction
manual.
3.1
Minimum Connections for the Functional Check
First Functional Test
Minimum Connections for the Functional Check
MR-J3-T
3 - 5
Fig. 3-1:
Wiring diagram for minimum configuration without control terminals
1-phase
200–230V AC
Servo motor
Motor