DELL 34XX User Manual

Host Group Parameter

Host Has Individual Virtual Disk-

to-LUN Mappings

Host Does Not Have Individual 

Virtual Disk-to-LUN Mappings

under the new host group 
defined by hostGroupName.

under the new host group 
defined by hostGroupName.

The host is removed from the 
host group as an independent 
partition and is placed under the 
root node.

The host is removed from the 
present host group and is placed 
under the default group.

The command fails.

The host is removed from the 
present host group and is placed 
under the default group.

NOTE: When you use this command, you can specify one or more of the optional parameters. You 
do not, however, need to use all of the parameters.

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the 
names. Command names can have a maximum of 30 characters. If you exceed the maximum 
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Set Host Channel

Description

This command defines the loop ID for the host channel.

Syntax

set hostChannel [hostChannelNumber]

preferredID=portID

Parameters

Parameter

Description

hostChannel

The identifier number of the host channel for 
which you want to set the loop ID.
The host channel identifier number is constructed 

by combining the RAID controller module number 

and the host channel number. Enclose the host 

channel identifier number in square brackets ([ ]). 

Separate the RAID controller module number from 

the host channel number with a comma.

For example, the identifier number for host 

channel 2 on RAID controller module 0 would be 

[0,2].

preferredID

The port identifier for the specified host port. Port 
ID values are 0 to 127.

294