DELL 34XX User Manual

Parameter

Description

label has special characters, enclose the HBA host 
port label in double quotation marks (" ").

host

The name of the host to which the HBA host port 
is connected. Enclose the host name in double 
quotation marks (" ").

userLabel

The new name that you want to give to the HBA 
host port. Enclose the new name of the HBA host 
port in double quotation marks (" ").

NOTE: When you use this command, you can specify one or more of the optional parameters. You 
do not, however, need to use all of the parameters.

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the 
names. Command names can have a maximum of 30 characters. If you exceed the maximum 
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Set iSCSI Initiator

Description

This command sets the attributes for an iSCSI initiator.

Syntax

set iscsiInitiator (["iscsiID"] | <"wwID">)

(userLabel="newName" |

host="newHostName" |

chapSecret="newSecurityKey")

Parameters

Parameter

Description

iscsiID

The name of the iSCSI initiator for which you want to 
set attributes.

userLabel

The new name that you want to use for the iSCSI 
initiator.

host

The name of the new host to which the HBA host 
port is connected. Enclose the host name in double 
quotation marks (" ").

chapSecret

The password that you want to use to authenticate a 
peer connection.

NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that authenticates the 
peer of a connection. CHAP is based upon the peers sharing a “secret.” A secret is a security key that 
is similar to a password.

296