DELL 34XX User Manual
Set Host Group
Description
This command renames a host group.
Syntax
set hostGroup [hostGroupName]
userLabel="newHostGroupName"
Parameters
Parameter
Description
hostGroup
Name of the host group to rename. You must put
brackets ([ ]) around the host group name. If the
host group name has special characters, you must
also put quotation marks (" ") around the host
group name.
userLabel
New name for the host group. You must put
quotation marks (" ") around the host group name.
NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the
names. Command names can have a maximum of 30 characters. If you exceed the maximum
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
names. Command names can have a maximum of 30 characters. If you exceed the maximum
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
Set Host Port
Description
This command changes the host type for an HBA host port. You can also change an HBA host port label
with this command.
with this command.
Syntax
set hostPort [portLabel] host=“hostName”
userLabel=“newPortLabel”
Parameters
Parameter
Description
hostPort
The name of the HBA host port for which you want
to change the host type, or for which you want to
create a new name. Enclose the HBA host port
name in square brackets ([ ]). If the HBA host port
to change the host type, or for which you want to
create a new name. Enclose the HBA host port
name in square brackets ([ ]). If the HBA host port
295