3M 11000 User Manual

17 

he infeed conveyor is equipped with four (4) 
adjustable legs that are located at the corners of 
the frame. The legs can be adjusted to obtain 
different conveyor bed heights from 585mm [23 inch] 
minimum to 715mm [28.1 inch] maximum. Refer 
to Figure 7-3 and the Specifi cation Section.

1.  Block up the conveyor frame to allow 

adequate leg adjustment.

2.  Loosen, but do not remove, two 
 

M8 x 16mm socket screws in one leg.  Adjust 
the leg length for the desired bed height. 
Retighten the two (2) screws to secure the 
leg.  Adjust all four (4) legs equally.

The machine should operate in a dry and relatively
clean environment at 5° to 50°C. with clean dry 
boxes-relative humidity between 0% and 80%

Minimum distance from wall (Figure 7-1):

A  =  1.0m. (39.4 inches)
B  =  0.7m. (27.6 inches)
Minimum height = 2.7m. (106.3 inches)

•

  To reduce the risk associated with    

− 

Read, understand, and follow all safety and 

operating instructions before operating or 

servicing the Infeed Conveyor/Case Sealer.

• 

− 

Use the appropriate rigging and material 

handling equipment when lifting or 

repositioning this equipment.

− 

Use proper body mechanics when 

removing or installing taping heads that are 

moderately heavy or may be considered 

awkward to lift.

2011 June

a80f-if-NA