M-AUDIO DSM1 User Manual
Appendix A: Specifications
17
appendix a
Specifications
Technical Specifications
DSM1 Specifications
LF Driver
6.5-inch inverted anodized aluminum cone woofer with cone edge reinforcement
30mm voice coil with symmetrical force motor and flux stabilization rings
30mm voice coil with symmetrical force motor and flux stabilization rings
HF Driver
1-inch soft teteron dome tweeter with neodymium magnet and ferrofluid cooling
Frequency Response
49 Hz–27 kHz +/–3 dB
Crossover
2.7 kHz Linkwitz-Riley 24 dB/octave
Max SPL @ 1 meter
110 dB maximum peak SPL @ 1m for 1 unit (116 dB maximum peak per pair)
Input Sensitivity
+4 dBu pink noise input with Trim level set to 0 dB yields 90 dB @ 1m
LF power amplifier
100 W (1% THD into 6 Ohms)
HF power amplifier
80 W (0.5% THD into 6 Ohms)
THD+N
<0.05% (10 W into 6 Ohms)
Soft Limit feature
Independent anti-clipping limiters: tweeter limited to 0.5% THD, woofer limited to 5% THD
Power Requirements
User selectable for 90–130V~ 50/60 Hz or 180–264V~ 50/60 Hz
DSP
36-bit, 192 kHz processing
Protection
Over current, over temperature, turn-on/off transient, subsonic filter
Analog Inputs
XLR balanced (20 kOhms) and 1/4-inch TRS balanced (20 kOhms)
Digital Inputs
S/PDIF In and Thru (75 Ohms) and AES/EBU (110 Ohms);
built-in phase-lock loop (PLL) to reclock incoming bitstreams with low jitter (<250 psec p-p);
44.1, 48, 88.2, 96, 176.4, 192 kHz sample rates
built-in phase-lock loop (PLL) to reclock incoming bitstreams with low jitter (<250 psec p-p);
44.1, 48, 88.2, 96, 176.4, 192 kHz sample rates
Indicator
RGB LED