Yamaha HTR-6160 User Manual

Use this feature to select the component connected to the 
MULTI CH INPUT jacks (see page 25) as the input 
source.

Rotate the R

INPUT selector to select “MULTI 

CH” (or press E

MULTI CH IN).

“MULTI CH” appears in the front panel display.

y
Use “MULTI CH” menu in “INPUT MENU” to set the 
parameters for MULTI CH INPUT (see page 95).

Sound field programs cannot be selected when the component 
connected to the MULTI CH INPUT jacks is selected as the input 
source. 

Use this feature to turn the front speaker system (FRONT 
A and/or FRONT B) on or off.

Press A

SPEAKERS on the front panel 

repeatedly to turn on or off the set of front 
speakers connected to the FRONT A and/or 
EXTRA SP speaker terminals.
The active front speaker set changes as follows.

• FRONT A and B or FRONT B setting is not available when 

“EXTRA SP ASSIGN” is set to “PRESENCE”, “ZONE 2” or 
“NONE” (see page 85).

• Turn off the volume level of this unit when you switch the front 

speaker setting.

■ Using the Zone B feature

When you set “EXTRA SP ASSIGN” to “ZONE B” (see 
page 85

), you can use the speakers connected to the 

EXTRA SP speaker terminals in another room (Zone B).

Press A

SPEAKERS on the front panel 

repeatedly to turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in 
the main room are muted. 

If you select the sound field program and activate the Zone B 
speakers, Virtual CINEMA DSP activates automatically (see 
page 51).

Before performing the following operations, press 5AMP on 
the remote control.