Yamaha HTR-6160 User Manual

This unit comes with a variety of input jacks. Use this 
feature (audio input jack select) to switch between input 
jacks when more than one input jack is assigned to the 
same input source.

y
• We recommend that you set the audio input jack select to 

“AUTO” in most cases.

• You can adjust the default audio input jack select of this unit by 

using “AUDIO SELECT” in “OPTION MENU” (see page 98).

Press Q

AUDIO SELECT (or FAUDIO SEL) 

This feature is not available when no digital input jacks 
(OPTICAL, COAXIAL and HDMI) are assigned. In addition, 
HDMI is not available as an audio input jack select setting when 
the HDMI IN jacks are not used. Use “I/O ASSIGNMENT” in 
“INPUT MENU” to reassign the respective input jack (see 
page 93).

You can display the operating information of this unit on a 
video monitor.

Press O

DISPLAY on the remote control.

The current status screen appears in the OSD.

y
• You can select the amount of time that the current status is 

displayed in the OSD by using the “OSD-AMP” parameter 
in “OPTION MENU” (see page 96).

• To turn off the status screen, press ODISPLAY again.

The OSD signal is not output at the DVR and VCR VIDEO 
OUT jacks and will not be recorded.

Before performing the following operations, press 5AMP on 
the remote control.

AUTO

Automatically selects input signals in the 
following order: 
(1) HDMI 
(2) Digital signals 
(3) Analog signals

HDMI

Selects only HDMI signals. When HDMI 
signals are not input, no sound is output.

COAX/OPT

Automatically selects input signals in the 
following order: 
(1) Digital signals input at the COAXIAL 
jack 
(2) Digital signals input at the OPTICAL 
jack 
When no signals are input, no sound is 
output.

ANALOG

Selects only analog signals. If no analog 
signals are input, no sound is output.

A.SEL:AUTO

A.SEL:HDMI

INPUT:DVD

Sci-Fi

MOVIE

[DISPLAY]:STATUSOFF

STATUSVOL:-40.0dB