Quadra-Fire SAPPHIRE-D-PMH User Manual

30

Quadra-Fire  •  Sapphire  •  7055-116  Rev. D  •  6/11

   Position baffl e on top of baffl e retainers on left and 

right sides.  Centering baffl e on retainers, ensure that the dark 
painted bevelled edge and darker painted baffl e bottom side 
faces toward the front viewing area of the fi rebox. Bend the 
center tabs up to prevent the baffl e from sliding out.

  Install the vent pipe adapter with gasket or high-temp 

silicone to the rear vent opening.

  Place the grille gently into the opening on top of 

the appliance.

   Thread Allen bolts through nuts until fl ush. 

NOTE:  Two Allen bolts and two nuts are included in the 
component bag. Normally, only one is required on the leg 
not touching the fl oor.

   Slide assembled nuts and bolts into slots on legs 

with the nuts on the bottom.

   Use a 5/32 in. 4mm) Allen wrench to adjust legs 

up and down to desired level.

There are two side bricks.  Place the brick in position.  The 
top fl ange of the brick clip is positioned in a slot in the baffl e 
bracket.  The side brick fi ts behind the brick clip.

NOTE:  The bricks need to be installed before placing the 
logs in the fi rebox.

Baffle

Brick - 2 on each side

Brick Clip

This end goes in slot in baffle bracket

Brick slips behind clip

Brick Clip