Quadra-Fire SAPPHIRE-D-PMH User Manual

Quadra-Fire • Sapphire • 7055-116 Rev. D • 6/11

G. Positioning the Logs

While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.

PLEASE NOTE: Logs have been designed to work
specifically with the burner of this appliance. Exact
placement will ensure proper operation of your gas
appliance and reduce sooting.

Figure 8.11

Position rear log (#3) over the two locating pins.

Locating Pins

Place Log #3 over Locating Pins

Place upright
in depression

Figure 8.13

Place right front log (#1) into the depression. The

log sits upright and does not lean against log #3.

Figure 8.14

Place left front log (#2) into the depression. The

log sits upright and does not lean against log #3.

H. Mineral Wool

Improperly placed embers interferes with proper burner
operation.

• Follow ember placement instructions in

manual.

• Do NOT place embers directly over

burner ports.

• Replace ember material annually.

Explosion Risk.

WARNING

Figure 8.15

Apply dime size pieces sparingly along front

edge of burner. Do not block gas ports.

Place individual pieces of embers in front of and around the
gas log where they can be seen. Space them so that gas can
contact them on all sides. Try to avoid stacking the embers
on top of each other. This will assure maximum brightness
and effi cient use of the catalyst promoting brighter, cleaner
burning embers.

I. Embers

NOTE: Do not block gas ports.

Depression for Log #1

Depression for Log #2

Figure 8.12

Shows the depression locations for Logs #1

and #2.