Gigaset A400A User Manual

A400/A400A / GBR / A31008-M2201-L101-1-7619 / Version 4,  / starting.fm / 29.06.2010

The correct charge status can only be displayed if the batteries are first fully charged and dis-
charged.
¤ Charge the handset in the base for 6 hours. 

¤ After charging, remove the handset from the base and only replace it when the batteries 

are fully discharged. 

If you do not understand the language that has been set, press:

¤ 

421

¤ 

q

 Select language 

¤ OK (

‰

= selected)

 

¤ 

a

 (press and hold to return to idle status)

The handset must only be placed in the designated Gigaset A400/A400A base or the cor-
responding charging cradle.

u The handset is pre-registered to the base. If you have purchased a model with multiple 

handsets, all handsets will already be registered to the base. You do not need to regis-
ter the handset again. 

u After the first battery charge and discharge, you may place your handset in the charger 

after every call. 

u Always repeat the charging and discharging procedure if you remove the batteries 

from the handset and reinsert them.

u The batteries may warm up during charging. This is not dangerous.

u After a while, the charge capacity of the batteries will decrease for technical reasons.