Quantum fc230 User Guide
ATL P-Series Library User’s Guide Addendum - Prism FC230 Router
6331121-03, Ver. 3, Rel. 2
August 2002
6331121-03, Ver. 3, Rel. 2
August 2002
4
FC230 Router Configuration
The look, feel, and operation of the library’s graphical user interface
(GUI) panel remains unchanged.
Key to Successful
Configuration of the
FC230
Configuration of the
FC230
0
The FC230 must be configured using the on-board FC230 router
Services software. The key to successfully configuring the FC230
Option is to know how many:
• SCSI buses are present in the library
• SCSI devices are connected to each bus
• SCSI buses are present in the library
• SCSI devices are connected to each bus
FC230 Router Configuration
0
The FC230 router configuration includes the following steps:
•
•
•
•
•
Connect a Service PC
to the Library
to the Library
0
To connect a service PC to the library:
1
Open the library back access panel (see
Figure 1 Opening the Rear
Access Panel (ATL P2000
library shown)
Access Panel (ATL P2000
library shown)
Caution:
If there is more than one FC230 board in the library, be
sure to repeat this procedure for each board.
Rear access panel