Enterasys mrxi-22 User Guide
LOCAL MANAGEMENT
5-11
Figure 5-7
Configuration Screen
5.4.2
Configuration Screen Fields
The following briefly explains each field on the Configuration screen.
I/F
Gives the number of the interface corresponding to the channel over
which packets with that IP address are passing. On the MRXI, this value
is always 1.
Gives the number of the interface corresponding to the channel over
which packets with that IP address are passing. On the MRXI, this value
is always 1.
IP Address
Displays the IP address of the MRXI.
Displays the IP address of the MRXI.
SubNET Mask
Displays the subnet mask for the MRXI. A subnet mask is a 32-bit
quantity which “masks out” the network bits of the IP address. This is
done by setting the bits in the mask to 1 when the network treats the
corresponding bits in the IP address as part of the network or subnetwork
address, or to 0 if the corresponding bit identifies the host.
Displays the subnet mask for the MRXI. A subnet mask is a 32-bit
quantity which “masks out” the network bits of the IP address. This is
done by setting the bits in the mask to 1 when the network treats the
corresponding bits in the IP address as part of the network or subnetwork
address, or to 0 if the corresponding bit identifies the host.
MAC Address
Displays the physical address associated with the interface.
Displays the physical address associated with the interface.
MRXI-960 LOCAL MANAGEMENT
Cabletron MRXI Revision x.xx.xx
CONFIGURATION
I/F
1
1
Default Gateway: 0.0.0.0
Serial Port 1 Application: CONSOLE Baud Rate: 9600 --ACTIVE--
Serial Port 2 Application: OFFLINE
Serial Port 1 Application: CONSOLE Baud Rate: 9600 --ACTIVE--
Serial Port 2 Application: OFFLINE
Baud Rate: N/A
F6
F7
F9
F10
SAVE IP COMMUNITY NAMES TRAP TABLE SNMP TOOLS CLI RETURN
MAC Address
00-00-1d-05-dc-36
00-00-1d-05-dc-36
Port LOCK Override:
Port ENABLE Override:
OVERRIDE DISABLED
OVERRIDE DISABLED
OVERRIDE DISABLED
SubNET Mask
000.000.000.000
000.000.000.000
IP Address
000.000.000.000
000.000.000.000
F8