Enterasys mrxi-22 User Guide
LOCAL MANAGEMENT
5-12
Default Gateway
Displays the default gateway for the MRXI. This field is not defined until
an appropriate value is entered. The default gateway identifies the default
gateway device that will forward packets to other IP subnetworks.
Displays the default gateway for the MRXI. This field is not defined until
an appropriate value is entered. The default gateway identifies the default
gateway device that will forward packets to other IP subnetworks.
Serial Port 1 Application
Displays the port’s application setting as CONSOLE.
Displays the port’s application setting as CONSOLE.
Serial Port 2 Application
Displays the port’s application setting as OFFLINE or UPS.
Displays the port’s application setting as OFFLINE or UPS.
Baud Rate
Displays the Baud Rate setting of the device attached to the MRXI
through that serial ports. The setting for Serial Port 1 is 9600. The setting
for Serial Port 2 is N/A if you do not activate UPS or 2400 if you activate
UPS.
Displays the Baud Rate setting of the device attached to the MRXI
through that serial ports. The setting for Serial Port 1 is 9600. The setting
for Serial Port 2 is N/A if you do not activate UPS or 2400 if you activate
UPS.
Port LOCK Override
This command overrides the port locking security feature, unlocking all
ports in the MRXI.
This command overrides the port locking security feature, unlocking all
ports in the MRXI.
Port ENABLE Override
This command overrides the port disable feature, enabling all ports in the
MRXI.
This command overrides the port disable feature, enabling all ports in the
MRXI.
5.4.3
Setting the IP Address Table and SubNET Mask
Field
Field
To set the IP Address table:
1. Use the arrow keys to highlight the IP Address field.
2. Enter the IP address into this field. The format for this entry is
XXX.XXX.XXX.XXX, with values for XXX being from 0 to 255.
The screen beeps if you enter non-numerics or adjacent dots. If the
entry does not have three dots it will be rejected.
The screen beeps if you enter non-numerics or adjacent dots. If the
entry does not have three dots it will be rejected.
3. Press the Return key. The IP address is displayed and the natural
subnet mask for the user is generated and displayed also.
4. Should you need to modify the subnet mask, use the arrow keys to
highlight the SubNET Mask field.