Enterasys mrxi-22 User Guide

5. Enter the subnet mask into this field. The format for this entry is 

XXX.XXX.XXX.XXX with values for XXX being from 0 to 255.

6. Press the Return key.

7. Use the arrow keys to highlight the SAVE IP option and press the 

Return key, (or press F6). The message “SAVED OK” appears and 
the changes are saved to memory.

Please note that the first time you try to exit the screen without saving 
your changes, you will get a “NOT SAVED?” message. If you 
proceed to exit without saving, you will lose your edits.

The Default Gateway field allows you to describe the router through 
which the MRXI will be forwarding IP packets. 

To set the Default Gateway:

1. Use the arrow keys to highlight the Default Gateway field.

2. Enter the gateway’s default mask in this field. The format for this entry 

is XXX.XXX.XXX.XXX with values for XXX being from 0 to 255.

3. Press the Return key. If your entry is accepted as a valid default 

gateway, “OK” appears to the right of the field.

To connect to the Uninterruptible Power Supply (UPS) through the Local 
Management:

1. Use the arrow keys to highlight the Serial Port 2 Application: field.

2. Press the Return key so that “UPS” appears in the field. This field 

toggles between “OFFLINE” and “UPS”.

3. Use the arrow keys to highlight the Serial Port 2’s Baud Rate field and 

press the Return key so that “2400 Connect?” appears in the field.

4. Use the arrow keys to highlight Connect? and press the Return key.

5. Enter Y if you want to connect a UPS, or N if you do not want a UPS 

connection. If you pressed Y, you are connected to the UPS.