Enterasys 6000 User Manual
Setting Up the 6C105
6C105 Overview and Setup Guide
3-3
3.2.2
Installing the Cable Management Bar
To install the cable management bar, proceed as follows:
1.
Remove the cable management bar from the shipping box. Ensure that
there are four screws inside the bag with the cable management bar.
there are four screws inside the bag with the cable management bar.
2.
management bar with the two holes located underneath the 6C105,
near the front of the chassis.
near the front of the chassis.
3.
Using a Phillips screwdriver securely fasten the 4 screws.
Figure 3-1
Installing the Cable Management Bar
Bottom of Chassis
Front Panel of Chassis
Screws (4)
2016_05
Cable Management Bar