Ricoh 3224C Reference Guide
Using Administrator Settings
177
9
Programming Bypass Tray Paper
Size
Size
A Press [Bypass Tray Paper Size].
You can select a size from [Auto
Detect]
Detect]
, [Standard Size], or [Cus-
tom Size]
.
If you select [Auto Detect], pro-
ceed to step
ceed to step
G.
If you select [Standard Size], pro-
ceed to steps
ceed to steps
C, and G.
If you select [Custom Size], pro-
ceed to steps
ceed to steps
D to G.
B Select the size you want to pro-
gram.
Note
❒ If you select [Auto Detect], the
machine recognizes the pa-
per size automatically.
• The machine will detect
per size automatically.
• The machine will detect
the paper size for the by-
pass tray as the short edge
of the paper is inserted
into the machine. Even if
you placed an A4 size
sheet in the
pass tray as the short edge
of the paper is inserted
into the machine. Even if
you placed an A4 size
sheet in the
K orientation,
the machine will detect it
as A3
as A3
L.
❒ If you select [Standard Size],
select a paper size displayed,
and then proceed to step
and then proceed to step
G.
❒ If you select [Custom Size],
proceed to step
D.
C Select the size you want to pro-
gram from the sizes shown.
D Make sure that [↕Vertical] is se-
lected.
E Enter the vertical size of the pa-
per using the number keys,
and then press [
and then press [
#
#
#
#].
Note
❒ You can specify a vertical
size from 8.3 inch (210mm) to
12.0 inch (305mm). You can-
not enter a size smaller than
8.3 inch or larger than 12.0
inch.
12.0 inch (305mm). You can-
not enter a size smaller than
8.3 inch or larger than 12.0
inch.
❒ Each time you press [mm] or
[inch]
, the units switch be-
tween “mm” and “inch”. If
y o u e n t e r a l e n g t h a n d
change the units by pressing
[mm]
y o u e n t e r a l e n g t h a n d
change the units by pressing
[mm]
or [inch], it is converted
automatically (fractions are
rounded off).
rounded off).
F Enter the horizontal size of the
paper using the number keys,
and then press [
and then press [
#
#
#
#].
ThemisC1_Fax_EN-F_FM.book Page 177 Tuesday, January 11, 2005 4:59 PM