Ricoh cl7100 User Guide
67
4. Troubleshooting
Error & Status Messages on the Control
Panel
Panel
This section explains what the messages that appear on the control panel mean
and what to do when a particular message appears.
and what to do when a particular message appears.
❖
❖
❖
❖ Messages (in alphabetical order)
Messages
Description
Recommended Action
Add Staples
The stapler is out of staples.
Job is not stapled.
Job is not stapled.
Replace staples.
Add Toner/Yellow/Magen-
ta/Cyan/Black
ta/Cyan/Black
The printer is out of the indi-
cated toner(s).
cated toner(s).
Replace the toner cartridge of
the indicated color(s).
the indicated color(s).
Add Toner: Cyan
The printer is out of toner (C). Replace the toner cartridge (C).
Add Toner: Magenta
The printer is out of toner (M). Replace the toner cartridge (M).
Add Toner: Yellow
The printer is out of toner (Y). Replace the toner cartridge (Y).
Calibrating...
The printer is calibrating the
color.
color.
Wait a while.
Call Service: EC Power Off On
If Error Reoccur Call Service
A communication error sent
from the engine to the control-
ler.
from the engine to the control-
ler.
A communication error sent
from the engine to the control-
ler.
from the engine to the control-
ler.
Cannot check Signal in Ad hoc An attempt to check the radio
signal was made while the
communication mode was set
to [Ad hoc] in the interface set-
tings.
communication mode was set
to [Ad hoc] in the interface set-
tings.
To check the radio signal , se-
lect Infrastructure in the com-
munication mode settings.
lect Infrastructure in the com-
munication mode settings.
Change Setting Tray #
Tray Paper Size:
Paper Type:
Paper Type:
The paper size and type set-
ting in the tray differs from
that of actual paper size and
type in the tray.
ting in the tray differs from
that of actual paper size and
type in the tray.
Load paper of the selected size
in the tray, and then change
the paper size setting with the
control panel. Or, press the
in the tray, and then change
the paper size setting with the
control panel. Or, press the
{{{{Form Feed}}}} key, and then se-
lect the tray using the control
panel. Or, press the
panel. Or, press the
{{{{Job Re-
set
}}}} key to cancel the print job.