Ricoh cl7100 User Guide

Error & Status Messages on the Control Panel

69

Error: Enter 10 or 26 Charac-
ters

An ID with an invalid number 
of digits was entered for the 
WEP key.

Enter the correct number of 
digits for the WEP key.

Error: Enter 5 or 13 Characters An ID with an invalid number 

of digits was entered for the 
WEP key.

Enter the correct number of 
digits for the WEP key.

Error: Tray # Form Feed

Or Job Reset Then Power Of-
fOn

The printer identified the fail-
ure of the indicated paper 
tray. The job is not printed.

Apply Form Feed from anoth-
er tray or cancel the job, and 
then switch your printer Off, 
then back On. If the error con-
tinues, contact your sales or 
service representative.

Exceeded Max. Pages (Col-
late)

The printer identified a colla-
tion page overflow error.

Add extra RAM.

Install the optional hard disk 
drive.

Exceeded Max. Stored Files

The maximum number of 
stored files has been exceeded 
during Sample Print of 
Locked Print.

Delete stored files.

Exceeded Max. Stored Pages

The maximum number of 
pages has been exceeded dur-
ing Sample Print of Locked 
Print.

Reduce the number of pages 
to print.

Hardware Problem Ethernet

The printer identified an 
Ethernet error.

Turn the power off, and then 
on. If the message appears 
again, contact your sales or 
service representative.

Hardware Problem Finisher

There is a problem with the 
finisher.

Turn the power off, and then 
on. Remove and re-install the 
finisher correctly. If the mes-
sage appears again, contact 
your sales or service represen-
tative.

See p.2 “Detaching and Reat-
taching the Options”.

Hardware Problem HDD

The printer identified a HDD 
Board error.

Turn the power off, and then 
on. Remove and re-install the 
HDD board correctly. If the 
message appears again, con-
tact your sales or service rep-
resentative.
See “Printer Hard Disk”, Setup 
Guide.