Intermec 5020 User Guide
Chapter 6 — CK30 and CK31 Handheld Computers
76
Data Collection Browser User’s Guide
Setting a Connection Delay (Optional)
If the CK30 or CK31 is communicating with your network through a non-
Intermec access point, the dcBrowser client may fail to connect to the
dcBrowser gateway after the CK30 or CK31 has been warm booted. The
dcBrowser client must wait for the CK30 or CK31 to connect to a DHCP
server or finish other network services before it can connect to the
dcBrowser gateway.
Intermec access point, the dcBrowser client may fail to connect to the
dcBrowser gateway after the CK30 or CK31 has been warm booted. The
dcBrowser client must wait for the CK30 or CK31 to connect to a DHCP
server or finish other network services before it can connect to the
dcBrowser gateway.
To set a connection delay
1
Copy IMDCB.INI from the root directory on the CK30 or CK31 to
your desktop PC. For help, see the handheld computer user’s manual.
your desktop PC. For help, see the handheld computer user’s manual.
2
On your desktop PC, open IMDCB.INI in a text editor, such as
Notepad.
Notepad.
3
Add the following line:
CONNECT_DELAY=delay
where delay is the number of seconds you want the dcBrowser client to
wait to connect after the CK30 or CK31 warm boots. For example,
adding the following line causes the dcBrowser client to wait 10 seconds
before trying to connect.
wait to connect after the CK30 or CK31 warm boots. For example,
adding the following line causes the dcBrowser client to wait 10 seconds
before trying to connect.
CONNECT_DELAY=10
4
Save the changes to IMDCB.INI. Do not change the name of the .ini
file.
file.
5
Copy IMDCB.INI to the root directory on the CK30 or CK31. For
help, see the handheld computer user’s manual.
help, see the handheld computer user’s manual.