Intermec 5020 User Guide
Chapter 7 — Trakker Antares Terminals
78
Data Collection Browser User’s Guide
Verifying the dcBrowser Client is Loaded
If your Trakker Antares TCP/IP or UDP Plus terminals came preloaded
with the dcBrowser client, go to
with the dcBrowser client, go to
.
If you want to update your version of the dcBrowser client, go to the next
section,
section,
To determine if you have the dcBrowser client loaded on your terminal
1
On your terminal, access the TRAKKER Antares 2400 Menu System by
pressing ) y 2 4 8 or by scanning this bar code:
pressing ) y 2 4 8 or by scanning this bar code:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
2
Choose System Menu from the Main Menu, and then choose File
Manager.
Manager.
3
Select drive C and press ;. A list of applications that are loaded on
your terminal appears. Look through this list for
your terminal appears. Look through this list for
DCBT24.BIN
, which is
the dcBrowser client filename:
• If you see
DCBT24.BIN
on the list, you have the dcBrowser client
loaded on your terminal. Go to
• If you do not see
DCBT24.BIN
on the list, you do not have the
dcBrowser client loaded. Go to the next section,
Loading the dcBrowser Client
This section explains how to load the dcBrowser client on your Trakker
Antares TCP/IP or UDP Plus terminals. You cannot load the dcBrowser
client on a Trakker Antares WTP terminal.
Antares TCP/IP or UDP Plus terminals. You cannot load the dcBrowser
client on a Trakker Antares WTP terminal.
You can load the dcBrowser client on your terminals in one of the following
four ways:
four ways:
• Use the Windows-based FileCopy utility.
• Use the DOS utility,
LOADER.EXE
.
• Use the Receive File or Transmit File reader commands.
• Use a host application.
Note: If your terminal has a Left Enter key (y), you must use it when
entering the key sequences in Step 1; otherwise, just use the ; key.
entering the key sequences in Step 1; otherwise, just use the ; key.