Intermec cn2a User Guide
Chapter 3 — Adding the CN2A to the Network
72
CN2A Mobile Computer User’s Manual
Transferring Files With FTP
You can use FTP (File Transfer Protocol) to transfer files to or
from your CN2A. FTP support is provided through the FTP
Server application FTPDCE.EXE installed on your CN2A.
from your CN2A. FTP support is provided through the FTP
Server application FTPDCE.EXE installed on your CN2A.
Enabling the FTP Server on the CN2A
You must enable the FTP Server through the Control Panel.
To enable FTP
1
Go to Start > Settings > Control Panel.
2
Double-tap the Utilities icon. The Settings screen appears.
3
Tap the FTP Service tab to bring the tab forward.
4
Check the Enable FTP Service check box.
5
Tap OK to save your changes and exit the Settings screen.
6
Tap X to exit the Control Panel. The FTP Server begins
running immediately. You do not need to warm boot the
CN2A.
running immediately. You do not need to warm boot the
CN2A.
You are ready to use FTP to transfer files. For help, see “Using
FTP to Transfer Files” on page 74.
FTP to Transfer Files” on page 74.