Intermec cn2a User Guide
Chapter 3 — Adding the CN2A to the Network
CN2A Mobile Computer User’s Manual
73
Changing the Default FTP User Name and Password
The default FTP user name is
Intermec
and the default
password is
cr52401
. You can disable the default user name and
password and create an access control list that specifies which
users can use the FTP Server.
users can use the FTP Server.
To change the default FTP user name and password
1
Edit the registry to set this parameter:
;disable default intermec account
[HKEY_LOCAL_MACHINE\Software\Intermec\IFTP]
“UseDefaultPW”=dword:00000000
2
Create an access control list called FTPDCE.TXT using this
format:
format:
FTPDCE:user1!password1<cr><lf>user2!password2<cr
><lf>user3!password3<cr><lf>...
><lf>user3!password3<cr><lf>...
Where user# and password# are the case-sensitive user names
and passwords, separated by an exclamation point (!).
and passwords, separated by an exclamation point (!).
3
Copy FTPDCE.TXT to the \Windows directory on the
CN2A, which is where the FTPDCE.EXE server is located.
CN2A, which is where the FTPDCE.EXE server is located.
4
Stop and start the FTP Server. This forces the FTP Server to
encrypt the access control list, create a hidden, encrypted file
called FTPDCE.DAT, and then delete FTPDCE.TXT.
encrypt the access control list, create a hidden, encrypted file
called FTPDCE.DAT, and then delete FTPDCE.TXT.
Follow these steps to stop and start the FTP Server:
a
Go to Start > Settings > Control Panel.
b
Double-tap the Utilities icon to open the Settings screen.
c
Uncheck the Enable FTP Service check box.
d
Tap OK to save the change and exit the Setting screen.
e
Double-tap the Utilities icon to open the Settings screen.
f
Tap the FTP Service tab to bring the tab forward.
Note: You can run the Microsoft eMbedded Visual C++
©
Remote Registry Editor on your PC, using ActiveSync to
connect to the CN2A. Or you can download and run a third-
party registry editing program on your CN2A.
connect to the CN2A. Or you can download and run a third-
party registry editing program on your CN2A.