Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
135
Automatic Shutoff
Terminals: All Trakker Antares terminals.
Description: Defines the maximum length of time the terminal remains on when there
is no activity. When you do not use the terminal for the length of time set
with this command, the terminal automatically turns off as if you had
pressed œ to turn it off.
with this command, the terminal automatically turns off as if you had
pressed œ to turn it off.
When you press œ to turn on the terminal, the terminal either resumes
exactly where it was when you turned it off, or the terminal boots and
restarts your application. Resume is controlled through the Resume
Execution command. For help, see “Resume Execution” on page 226.
exactly where it was when you turned it off, or the terminal boots and
restarts your application. Resume is controlled through the Resume
Execution command. For help, see “Resume Execution” on page 226.
Power Management Tip: You should use the Automatic Shutoff feature
to preserve battery pack power on 241X, 242X, and 243X terminals.
to preserve battery pack power on 241X, 242X, and 243X terminals.
Syntax: EZdata
Acceptable values for data are:
0
Disabled (always on)
02-75
Shutoff time in minutes
Default: 0
(Disabled)
Menu System: Main Menu > Configuration Menu > Terminal Menu > Power
Management
Bar Codes: To disable automatic shutoff, scan this bar code:
Disable Automatic Shutoff
*$+EZ0*
*$+EZ0*
Or: To set a timeout:
1
Scan this bar code:
Enter Accumulate Mode / Set Automatic Shutoff
*+/$+EZ*
*+/$+EZ*
2
Scan a numeric value for data from these bar codes:
*0*
*1*
*0*
*1*
*2*
*3*
*2*
*3*