Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
133
*4*
*5*
*4*
*5*
*6*
*7*
*6*
*7*
*8*
*9*
*8*
*9*
3
Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
AP Density
Terminals: 2415, 2425, 2435, 2455, 2475, and 2485/6 with 802.11b radios.
Description: Controls the roaming sensitivity of the radios. You can use this parameter
to virtually reduce the range of the radio. When you increase the AP
density, you do not reduce the absolute range of the radio, but the
roaming algorithms are modified to allow significant overlap of the radio
coverage. Increasing the AP density lets you create a higher performance
radio network, but you will need significantly more access points to cover a
given area.
density, you do not reduce the absolute range of the radio, but the
roaming algorithms are modified to allow significant overlap of the radio
coverage. Increasing the AP density lets you create a higher performance
radio network, but you will need significantly more access points to cover a
given area.
Syntax: LGdata
Acceptable values for data are:
1 Low
density
2 Medium
density
3 High
density
Default: Low
density
Menu System: Main Menu > Configuration Menu > Communications Menu > Radio
Bar Codes: Scan one of these bar codes:
Low AP Density
Medium AP Density
*$+LG1*
*$+LG2*
*$+LG1* *$+LG2*
High AP Density
High AP Density
*$+LG3*
*$+LG3*