Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
134
Trakker Antares 2400 Family System Manual
AP MAC Address
Terminals: 2415, 2425, 2435, 2455, 2475, and 2485/6.
Description: Returns the MAC address of the radio that is installed in the access point
that the terminal is communicating with. You can only use this read-only
command in an application to return the value (MAC address) to the
application.
command in an application to return the value (MAC address) to the
application.
Syntax: RA
Default: None
Menu System: N/A
Bar Codes: N/A
Append Time
Terminals: All Trakker Antares terminals.
Description: Appends the time to bar code labels that are scanned into the terminal.
You can also use the Time in Seconds command to append the time in
hours and minutes only, or hours, minutes, and seconds. The time is
appended to the data in the form HH:MM:SS. For help, see “Time in
Seconds” on page 256.
hours and minutes only, or hours, minutes, and seconds. The time is
appended to the data in the form HH:MM:SS. For help, see “Time in
Seconds” on page 256.
Syntax: DEdata
Acceptable values for data are:
0 Disabled
1 Enabled
1 Enabled
Default: Disabled
Menu System: Main Menu > Configuration Menu > Terminal Menu > Append Time
Bar Codes: Scan one of these bar codes:
Disable Append Time
Enable Append Time
*$+DE0*
*$+DE1*
*$+DE0* *$+DE1*