Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
170
Trakker Antares 2400 Family System Manual
2
Scan a numeric value from 0 to 255 to set an n field of the default
router address from these bar codes.
router address from these bar codes.
*0*
*1*
*0*
*1*
*2*
*3*
*2*
*3*
*4*
*5*
*4*
*5*
*6*
*7*
*6*
*7*
*8*
*9*
*8*
*9*
3
Scan this bar code:
. (Period)
*.*
*.*
4
Repeat Steps 2 and 3 to set the next three numbers in the default router
address field. After you scan the last address segment, go to Step 5. Do
not scan the period after the last address segment.
address field. After you scan the last address segment, go to Step 5. Do
not scan the period after the last address segment.
5
Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Device Management
Terminals: 2415, 2425, 2435, 2455, 2475, 2480/1 with the Ethernet option, and
2485/6 using the TCP/IP or UDP Plus network.
Description: Enables or disables device management on the terminal. When Device
Management is enabled, the Avalanche Enabler on the terminal tries to
locate an Avalanche Agent. For more information about Wavelink
Avalanche, see “Managing Your Terminals with Wavelink Avalanche” on
page 38.
locate an Avalanche Agent. For more information about Wavelink
Avalanche, see “Managing Your Terminals with Wavelink Avalanche” on
page 38.
Syntax: UDdata
Acceptable values for data are:
0
Disable Device Management
1
Enable Device Management