Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
171
Default: Enabled
Menu System: Main Menu > Configuration Menu > Device Management > Use Device
Mgmt
Bar Codes: To enable or disable Device Management:
1
Scan one of these bar codes to disable or enable Device Management:
Disable Device Management
Enable DHCP Device Management
*$+UD0*
*$+UD1*
*$+UD0*
*$+UD1*
2
To save the changes in flash memory, scan this bar code:
Save Configuration in Flash Memory
*.+1*
*.+1*
Device Manager IP Address
Terminals: 2415, 2425, 2435, 2455, 2475, 2480/1 with the Ethernet option, and
2485/6 using the TCP/IP or UDP Plus network.
Description: Defines the IP address assigned to the Avalanche Agent in your Wavelink
Avalanche client management system. The Avalanche Enabler uses this IP
address to locate the Agent. The Agent does not need to be on the same
subnet as the terminal.
address to locate the Agent. The Agent does not need to be on the same
subnet as the terminal.
Once a network profile is downloaded, the terminal will use the Agent IP
address defined by the network profile instead of the one set by this
command.
address defined by the network profile instead of the one set by this
command.
You can set the Device Manager IP Address to 0.0.0.0 to allow the Enabler
to search for any Agent on the local subnet.
to search for any Agent on the local subnet.
Syntax: UEn.n.n.n
where each n address segment is a number from 0 to 255. The Device
Manager IP Address field consists of four separate numbers, each separated
by a period.
Manager IP Address field consists of four separate numbers, each separated
by a period.
Default: 0.0.0.0 (no Avalanche Agent IP address)
Menu System: Main Menu > Configuration Menu > Device Management > Manager IP