Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
213
Network Port
Terminals: 2415, 2425, 2435, 2455, 2461, 2475, 2480/1 with the Ethernet option,
and 2485/6 using the TCP/IP or UDP Plus network.
Description: Defines the network port that TCP/IP or UDP Plus uses for
communications in the RF or Ethernet network.
In a TCP/IP network, set the network port to the appropriate port for the
application you are using on the terminal. The default network port value,
which is 23, enables VT/ANSI Telnet communications. In a UDP Plus
network, set the network port on the terminal to the same value as the
network port on the Intermec Gateway or DCS 30X.
application you are using on the terminal. The default network port value,
which is 23, enables VT/ANSI Telnet communications. In a UDP Plus
network, set the network port on the terminal to the same value as the
network port on the Intermec Gateway or DCS 30X.
Syntax: NGdata
Acceptable values for data are any number from 1 to 65535.
Default: 00023 Terminal with TCP/IP
05555 Terminal with UDP Plus
Menu System: Main Menu > Configuration Menu > Communications Menu > Advanced
Network
Bar Codes: To set the default network port for a terminal with TCP/IP, scan this bar
code:
Default Network Port for TCP/IP
*$+NG23*
*$+NG23*
To set the default network port for a terminal with UDP Plus, scan this
bar code:
bar code:
Default Network Port for UDP Plus
*$+NG5555*
*$+NG5555*
Or: To set the network port:
1
Scan this bar code:
Enter Accumulate Mode / Set Network Port
*+/$+NG*
*+/$+NG*
2
Scan a numeric value for data from these bar codes:
*0*
*1*
*0*
*1*
*2*
*3*
*2*
*3*