Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
223
Menu System: N/A
Bar Codes: N/A
RAM Drive Size
Terminals: All Trakker Antares terminals.
Description: Configures the size and use of the RAM drive (drive E). You can use the
RAM drive to temporarily store data and files. You can also disable the
RAM drive and use the additional 256K for application execution space or
programmable (Malloc) memory allocations.
RAM drive and use the additional 256K for application execution space or
programmable (Malloc) memory allocations.
After you set the RAM drive, you must save the configuration in flash
memory and boot the terminal for the change to take effect.
memory and boot the terminal for the change to take effect.
Note: When you boot or reset the terminal, all files on the RAM drive are
destroyed.
destroyed.
Syntax: FRdata
Acceptable values for data are:
0
Disabled, no RAM drive
1256
RAM drive size in kilobytes (K)
Default: 0
(Disabled)
Menu System: Main Menu > Configuration Menu > Terminal Menu > RAM Drive
Bar Codes: To disable the RAM drive, scan this bar code:
Disable RAM Drive
*$+FR0*
*$+FR0*
Or: To set the RAM drive size:
1
Scan this bar code:
Enter Accumulate Mode / Set RAM Drive Size
*+/$+FR*
*+/$+FR*
2
Scan a numeric value for data from these bar codes:
*0*
*1*
*0*
*1*
*2*
*3*
*2*
*3*