Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
222
Trakker Antares 2400 Family System Manual
Bar Codes: To disable the preamble, scan this bar code:
Disable Preamble
*$+AD*
*$+AD*
Or: To set the preamble to an ASCII character string:
Note: To set this command using the bar code labels from the “Full ASCII
Bar Code Chart” on page 284, you must configure the terminal to use
Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.
Bar Code Chart” on page 284, you must configure the terminal to use
Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.
1
Scan this bar code:
Enter Accumulate Mode / Set Preamble
*+/$+AD*
*+/$+AD*
2
Scan a value for data from the “Full ASCII Bar Code Chart” on page
284. The preamble can be from 1 to 25 characters.
284. The preamble can be from 1 to 25 characters.
3
Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Example: You want to set a preamble that includes quotation marks. Enter the
preamble by scanning this full ASCII bar code label:
Set Preamble to “B”
*/D/KAD/B/B/BB/B/B/B*
*$+AD"""B"""*
You must enclose the data within quotation marks and precede each
quotation mark with another quotation mark so that the quotation marks
are not treated as the end of the data.
quotation mark with another quotation mark so that the quotation marks
are not treated as the end of the data.
Radio MAC Address
Terminals: 2415, 2425, 2435, 2455, 2475, and 2485/6.
Description: Returns the MAC address of the radio that is installed in the RF terminal.
You can only use this read-only command in an application to return the
value (MAC address) to the application.
value (MAC address) to the application.
Syntax: RI
Default: None