Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
229
Syntax: SBdata
Acceptable values for data are:
0 One-shot
mode
1 Automatic
mode
Default: One-Shot
mode
Menu System: Main Menu > Configuration Menu > Terminal Menu > Scanner
Bar Codes: Scan one of these bar codes:
Enable One-Shot Mode
Enable Automatic Mode
*$+SB0*
*$+SB1*
*$+SB0* *$+SB1*
Scanner Port (COM4)
Terminals: 2455.
Description: Allows you to configure the Scanner port to function either as a Scanner
port or as an additional serial port (COM4). There are three options:
scanner port, RS-232 port, and inverted RS-232 port.
scanner port, RS-232 port, and inverted RS-232 port.
Scanner Port Options
Option
Description
Scanner port
Allows you to connect a scanner to the Scanner port on the bottom back
panel of the 2455.
panel of the 2455.
RS-232 port
Allows you to use the Scanner port as COM4 to connect a serial device. In
this configuration, the Scanner port supports TTL voltage-level (0-5V)
serial devices.
this configuration, the Scanner port supports TTL voltage-level (0-5V)
serial devices.
Inverted
RS-232 port
RS-232 port
Allows you to use the Scanner port as COM4 to connect a serial device. In
this configuration, the Scanner port supports inverted TTL voltage-level
serial devices.
this configuration, the Scanner port supports inverted TTL voltage-level
serial devices.
If you plan to use the Scanner port as COM4, you need to order the
COM Port Adapter Cable (Part No. 061799). You must use this cable to
connect a serial device to COM4. This cable does not provide an
environmentally sealed connection to the 2455.
COM Port Adapter Cable (Part No. 061799). You must use this cable to
connect a serial device to COM4. This cable does not provide an
environmentally sealed connection to the 2455.
Syntax: IXdata
Acceptable values for data are:
0 Scanner
port
1 RS-232
(COM4)
port
2
Inverted RS-232 (COM4) port
Default: Scanner port enabled