Intermec 2430 Quick Setup Guide
C d 39 nuggetfont
16
Trakker Antares 243X Handheld Terminal Quick Start Guide
code labels. Only enable the bar code symbologies that you need
to scan.
to scan.
Changing the Beep Volume
The 243X has a beeper that provides you with audio feedback.
To change the beep volume
•
Press l t 2 4 8 , l x 2 4 8 ,
or the orange > key and then * 2 4 8 to access
the TRAKKER Antares 2400 Menu System. Choose
Configuration Menu > Terminal Menu > Beeper.
the TRAKKER Antares 2400 Menu System. Choose
Configuration Menu > Terminal Menu > Beeper.
Learning About the Status Icons
You can use the status icons on the right side of the screen to
monitor the status of battery power, special keys, and network
communications. These icons only turn on to indicate current
status and are disabled by default.
monitor the status of battery power, special keys, and network
communications. These icons only turn on to indicate current
status and are disabled by default.
To enable the status icons
1
Press l t 2 4 8 , l x 2 4 8 , or the
orange > key and then * 2 4 8 to access the
TRAKKER Antares 2400 Menu System.
orange > key and then * 2 4 8 to access the
TRAKKER Antares 2400 Menu System.
2
Choose Configuration Menu > Terminal Menu > Display.
3
Set the Display Video Mode command to normal display
with icons (Nrm/Icon) or inverse display with icons
(Inv/Icon).
with icons (Nrm/Icon) or inverse display with icons
(Inv/Icon).
Status Icon Descriptions
Icon
Name
Description
Battery
This icon turns on when there is a low battery
charge and the terminal is on.
charge and the terminal is on.
Network
Connect
Connect
This icon tells you if the 2435 is connected to
your network. The Network Connect status
icon may be off, blinking, or on.
your network. The Network Connect status
icon may be off, blinking, or on.
Network
Transmit
Transmit
This icon turns on when data is buffered in
the RF network interface.
the RF network interface.