Intermec 2430 Quick Setup Guide
C d 39 nuggetfont
14
Trakker Antares 243X Handheld Terminal Quick Start Guide
Depending on the radio that is in the devices, you must match
certain parameters on the 2435s and on the access points.
certain parameters on the 2435s and on the access points.
Press l t 2 4 8 , l x 2 4 8 , or the
orange > key and then * 2 4 8 to access the TRAKKER
Antares 2400 Menu System. Choose Configuration Menu >
Communications Menu > Radio.
orange > key and then * 2 4 8 to access the TRAKKER
Antares 2400 Menu System. Choose Configuration Menu >
Communications Menu > Radio.
To configure the OpenAir radio parameters
1
In the Domain field, enter a number from 0 to 15. The 243X
can only communicate with access points that have the same
domain.
can only communicate with access points that have the same
domain.
2
In the Security ID field, enter up to 20 alphanumeric
characters or leave the field blank. The 243X can only
communicate with access points that have the same security
ID.
characters or leave the field blank. The 243X can only
communicate with access points that have the same security
ID.
To configure the 802.11b radio parameters
1
In the Network Name field, Enter up to 32 alphanumeric
characters. The 243X only communicates with access points
that have the same network name.
characters. The 243X only communicates with access points
that have the same network name.
2
Configure the security parameters:
• (non-802.1x security) Enable WEP Encryption and select
a WEP Transmit Key. Enter a WEP key value: WEP 64
requires 5 ASCII characters or hex pairs, and WEP 128
requires 13 ASCII characters or hex pairs.
requires 5 ASCII characters or hex pairs, and WEP 128
requires 13 ASCII characters or hex pairs.
• (802.1x security) Configure the User Name and
Password.
Choosing Your TE 2000 Configuration
If you have a TE 2000 application, your terminal is configured
for TE 2000 VT/ANSI by default. You may need to change the
configuration to TE 2000 5250 or TE 2000 3270.
for TE 2000 VT/ANSI by default. You may need to change the
configuration to TE 2000 5250 or TE 2000 3270.
To change the TE 2000 configuration
1
On your terminal, press r l. The TE 2000 main menu
appears.
appears.