Intermec 2480 Quick Setup Guide
nugget
d 39
Trakker Antares 248X Stationary Terminal Quick Start Guide
11
Attaching the Antenna
On the 2485 and 2486, the antenna is shipped
separately. Remove the antenna from the
shipping box and attach the antenna as shown.
separately. Remove the antenna from the
shipping box and attach the antenna as shown.
Choose a location for the terminal where the
antenna can be effective. Do not place the
terminal where the antenna is too close to a
metal wall or it will limit the communications
range.
antenna can be effective. Do not place the
terminal where the antenna is too close to a
metal wall or it will limit the communications
range.
Make sure all components with antennas
are at least 0.3 meters (1 foot) apart when
power is applied. Failure to comply could
result in equipment damage.
are at least 0.3 meters (1 foot) apart when
power is applied. Failure to comply could
result in equipment damage.
248XG.011
Attention: Assurez-vous que la distance entre tous les éléments avec
antennes soit d’au moins 0.3 mètres (un pied) avant de faire la
connexion avec l’alimentation électrique, faute de quoi vous risquez
d’endommager votre installation.
antennes soit d’au moins 0.3 mètres (un pied) avant de faire la
connexion avec l’alimentation électrique, faute de quoi vous risquez
d’endommager votre installation.
Using the Desk-Mount or Wall-Mount Bracket
There are two accessories to help you mount the terminal:
• Trakker Antares 248X Desk-Mount Bracket (P/N 066709)
• Trakker Antares 248X Wall-Mount Bracket (P/N 066708)
To install the desk-mount bracket
1
Connect power and all other devices through the back panel of the
terminal.
terminal.
2
Install the desk-mount bracket and the terminal. For help, see the
accessory instruction sheet.
accessory instruction sheet.
Desk-mount bracket
248XG017.eps