Intermec 301 Supplementary Manual
2
For Users Outside of the United States or Canada
This Intermec product transmits and receives data using either an 865 MHz or an 869 MHz RFID system.
Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the
Intermec web site for additional documentation at www.intermec.com.
This supplement includes lists of countries that have accepted, restricted, or prohibited the use of this product:
•
Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the
Intermec web site for additional documentation at www.intermec.com.
This supplement includes lists of countries that have accepted, restricted, or prohibited the use of this product:
•
For 865 MHz, see the “Country List for 865 MHz Compliance” on page 8.
•
For 869 MHz, see the “Country List for 869 MHz Compliance” on page 9.
865 MHz Compliance Information
Hereby, Intermec Technologies Corporation declares that the 865 MHz RFID Module is in compliance with the essential requirements and
other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards:
•
other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards:
•
ETSI EN 302 208
•
ETSI EN 301 489
•
EN 60950
The transmitter module’s maximum output power is 2 W. The products using this module are intended for business and industrial
environments. They should not be used in residential environments and by children.
environments. They should not be used in residential environments and by children.
Approved Antenna List - Liste d'antennes approuvées
Intermec P/N
N/P Intermec
N/P Intermec
Supplier P/N
Fournisseur
Fournisseur
Description
Description
Description
Gain (dBi)
Gain (dBi)
Gain (dBi)
Cable Loss (dB)
Perte du câble (dB)
Perte du câble (dB)
-
Mobile Mark BP6-915LCP
Patch CP - Plaque PC
2.5
2.4
-
Mobile Mark DLM3-915RS
Patch LP - Plaque PL
3.0
2.4
-
Mobile Mark EDN#241
Patch LP - Plaque PL
3.0
2.4
1-206589-00
Intermec 1-206589-00
Patch LP - Plaque PL
-3.4
N/A
1-971040-001
Intermec 1-971040-001
Patch LP - Plaque PL
-34
N/A
805-609-001
Cushcraft SP9028PC156RSM
Patch CP - Plaque PC
4.0
N/A
805-610-001
Maxrad MP8906
Patch LP - Plaque PL
8.0
2.4
805-622-002
Kathrein 25-178
Patch CP - Plaque PC
6.5
2.4
805-623-002
Kathrein 25-277
Patch CP - Plaque PC
5.5
2.4
805-626-001
Kathrein 25-578
Patch LP - Plaque PL
6.0
2.4
805-629-001
Mobile Mark PN10-915RCPI
Patch CP - Plaque PC
7.0
2.4
805-642-001
Tyco M/A-com MAA-000153-AT000
Patch LCP - Panneau PCG
7
2.4
805-654-001
Huber Suhner 84024995
Panel RCP - Panneau PCD
5.5
2.4
805-654-002
Huber Suhner 84024996
Panel LCP - Panneau PCG
5.5
2.4
805-655-001
Huber Suhner 84024999
Panel RCP - Panneau PCD
7
2.4
805-655-002
Huber Suhner 84024999
Panel LCP - Panneau PCG
7
2.4
805-816-002
Cushcraft S9026XR1RRN
Patch CP - Plaque PC
3.0
2.4
ITA915017
Intermec ITA915017
Patch LP - Plaque PL
-5.7
N/A
Caution: This marking indicates that the user should read all included documentation before use.
Warning: CENELEC regulations limit exposure to radio frequency (RF) radiation. To comply with these regulations,
operators of this device must maintain a distance of at least 20 cm (8 in) from the antenna assembly. While the device is
on, the operator’s body and parts of the body such as eyes, hands, or head, must be 20 cm (8 in) or farther from the cover
of the antenna assembly.
Warning: CENELEC regulations also require that the antenna assembly of this device be installed in accordance with the
installation procedures to allow the operator to comply with the limit. Use of antennas and accessories not authorized
may void the compliance of this product and may result in RF exposures beyond the limits established for this
equipment.
operators of this device must maintain a distance of at least 20 cm (8 in) from the antenna assembly. While the device is
on, the operator’s body and parts of the body such as eyes, hands, or head, must be 20 cm (8 in) or farther from the cover
of the antenna assembly.
Warning: CENELEC regulations also require that the antenna assembly of this device be installed in accordance with the
installation procedures to allow the operator to comply with the limit. Use of antennas and accessories not authorized
may void the compliance of this product and may result in RF exposures beyond the limits established for this
equipment.
0981
This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the
European Community.
European Community.