Campbell Hausfeld fp2071 cordless air compressor User Guide
Location
It is extremely important to use the
compressor in a clean, well ventilated
area where the surrounding air
temperature will not be more than
100°F.
compressor in a clean, well ventilated
area where the surrounding air
temperature will not be more than
100°F.
Do not locate the
compressor air inlet
compressor air inlet
near steam, paint spray, sandblast
areas or any other source of
contamination. This debris will damage
the motor.
areas or any other source of
contamination. This debris will damage
the motor.
To reduce the risk
of electrical shock,
of electrical shock,
do not expose to rain. Store indoors.
For household use only.
Electrical Data
The charger
supplied with this
supplied with this
product is for use on a nominal
120 volt circuit. Make sure that it is
connected to an outlet having same
configuration as plug.
120 volt circuit. Make sure that it is
connected to an outlet having same
configuration as plug.
WIRING
1. Local electrical wiring codes differ
1. Local electrical wiring codes differ
from area to area. Source wiring,
plug and protector must be rated for
at least the amperage and voltage
indicated on charger nameplate, and
meet all electrical codes for this
minimum.
plug and protector must be rated for
at least the amperage and voltage
indicated on charger nameplate, and
meet all electrical codes for this
minimum.
Pre-Operation
FUSE INSTALLATION
NOTE: The compressor is shipped
with fuse removed. To install fuse,
remove the fuse from the cover
and insert into plug located below
the cover.
When replacing the fuse, make sure
the compressor is turned OFF and
nothing is connected to it. (See
Specifications and Features sheet for
location of fuse.) NEVER replace a
blown fuse with a fuse having a higher
rating.
with fuse removed. To install fuse,
remove the fuse from the cover
and insert into plug located below
the cover.
When replacing the fuse, make sure
the compressor is turned OFF and
nothing is connected to it. (See
Specifications and Features sheet for
location of fuse.) NEVER replace a
blown fuse with a fuse having a higher
rating.
!
CAUTION
!
CAUTION
!
CAUTION
2
Cordless Air Compressor with Radio
Compressor parts may be hot
even if the unit is stopped.
even if the unit is stopped.
9. If the equipment should start to
abnormally vibrate, switch unit OFF
and check immediately for the
cause. Vibration is generally
a warning of trouble.
and check immediately for the
cause. Vibration is generally
a warning of trouble.
10. To reduce fire hazard, keep motor
free of oil, solvent, or excessive
grease.
grease.
11. Fast moving air will stir up dust and
debris which may be harmful.
Release air slowly when draining
moisture or depressurizing the
compressor system.
Release air slowly when draining
moisture or depressurizing the
compressor system.
Any misuse of unit could cause
property or equipment
damage and/or personal injury.
property or equipment
damage and/or personal injury.
Do not leave the
compressor
compressor
unattended while the unit is running.
Never exceed the
recommended pressure for
any inflatable object. Do not
over inflate objects. Over inflation
could cause property damage and/or
personal injury.
recommended pressure for
any inflatable object. Do not
over inflate objects. Over inflation
could cause property damage and/or
personal injury.
Always use a sep-
arate pressure
gauge to check the actual pressure in tires
and in low pressure inflatable objects.
and in low pressure inflatable objects.
SPRAYING PRECAUTIONS
Do not spray flammable
materials in vicinity of open
flame or near ignition sources
including the compressor unit.
materials in vicinity of open
flame or near ignition sources
including the compressor unit.
12. Do not smoke when spraying paint,
insecticides, or other flammable
substances.
substances.
13. Use a face mask/
respirator when
spraying and spray in a
well ventilated area to
prevent health and fire
hazards.
spraying and spray in a
well ventilated area to
prevent health and fire
hazards.
14. Do not direct paint or other sprayed
material at the compressor. Locate
compressor as far away from the
spraying area as possible to
minimize overspray accumulation
on the compressor.
compressor as far away from the
spraying area as possible to
minimize overspray accumulation
on the compressor.
!
WARNING
!
CAUTION
!
WARNING
!
WARNING
!
CAUTION
15. When spraying or cleaning with
solvents or toxic chemicals, follow
the instructions provided by the
chemical manufacturer.
the instructions provided by the
chemical manufacturer.
16. Do not continue to operate the
compressor after the yellow battery
indicator light comes on.
indicator light comes on.
17. Use only the enclosed recharging
adapter.
18. Avoid charging the battery at
temperatures below 40°F (5°C)
or above 105°F (40°C).
or above 105°F (40°C).
19. Never operate the
compressor near fire,
flammable gas or
liquid.
flammable gas or
liquid.
20. Never leave unit unattended while
in use.
21. Protect the unit from rain, snow or
other sources of moisture.
22. Turn OFF power switch when not in
use.
23. Always replace the fuse with the
same amperage rating (20 amp).
Never use a fuse with a higher
amperage rating.
Never use a fuse with a higher
amperage rating.
The cordless compressor battery is not
fully charged. The battery must be
charged using the 120-volt AC adapter
before the initial use. For best results,
charge the battery in temperatures
ranging from 65°F (18°C) to 75°F (24°C).
fully charged. The battery must be
charged using the 120-volt AC adapter
before the initial use. For best results,
charge the battery in temperatures
ranging from 65°F (18°C) to 75°F (24°C).
Do not operate
the compressor
the compressor
with the 120-volt AC recharging
adapter connected to the unit because
the charger could become damaged.
adapter connected to the unit because
the charger could become damaged.
NOTICE
General Safety
(Cont.)
Figure 1
Pressure
Regulator
Regulator
Speaker
Handle
Pressure
Gauge
Gauge
Charger
Jack
Jack
Radio
Controls
Controls
Tank
Do not operate
the compressor
the compressor
with the 120-volt AC recharging
adapter connected to the unit because
the charger could become damaged.
adapter connected to the unit because
the charger could become damaged.
NOTICE
Notas
19 Sp
FP2070 y FP2071