Xerox 7100n User Guide

Installation and Setup

Phaser 7100 Color Printer

User Guide

1. Insert the

Software and Documentation disc into your computer.

2. Double-click the disc icon on your desktop to see the

.dmg file for your printer.

3. Open the

.dmg file, and navigate to the appropriate installer file for your operating system.

4. Open the installer file.
5. Click

Continue to acknowledge the warning and introductory messages.

6. Click

Continue and accept the license agreement.

7. To accept the current installation location, click

Install, or select another location for the installation

files, then click

Install.

8. Enter your password, then click

OK.

9. Select your printer in the list of discovered printers, then click

Continue.

10. If your printer does not appear in the list of discovered printers:

a. Click the

Network Printer Icon.

b. Type the IP address of your printer, then click

Continue.

c. Select your printer in the list of discovered printers, then click

Continue.

11. To accept the print queue message, click

OK.

12. Select or clear the

Set Printer as Default and Print a Test Page check boxes.

13. Click

Continue, then click Close.

Note:

The printer is added automatically to the printer queue.

To verify that the print driver recognizes the installed options:
1. From the Apple menu, click

System Preferences > Print & Fax or Print & Scan.

2. Select the printer in the list, then click

Options and Supplies.

3. Click

Driver, then confirm that your printer is selected.

4. Confirm that all of the options installed on the printer appear correct.
5. If you change settings, click

Apply Changes, close the window, and quit System Preferences.

Installing Drivers and Utilities for UNIX and Linux

Xerox

Services for UNIX Systems is a two part installation process. It requires the installation of a

Xerox

Services for UNIX Systems code package and a printer support package. The Xerox

Services for

UNIX Systems code package must be installed before installing the printer support package.

Note:

You must have root or superuser privileges to perform the UNIX print driver installation on

your computer.

1. At the printer, do the following:

a. Verify that both the TCP/IP protocol and the proper connector are enabled.
b. On the printer control panel, do one of the following for the IP address:

• Allow the printer to set up a DHCP address.
• Enter the IP address manually.