Xerox 550 User Guide
2
Setting Up
2-12
Phaser CopyStation
Powering up and making a test copy
Making a test print lets you verify that the CopyStation and printer are
connected correctly and that SCSI IDs are set properly for normal operation.
This procedure also shows the proper power-up sequence for devices in the
SCSI chain.
connected correctly and that SCSI IDs are set properly for normal operation.
This procedure also shows the proper power-up sequence for devices in the
SCSI chain.
1.
If you have a disk drive connected, switch its power on before the
printer’s.
printer’s.
Note
The printer looks for a disk drive in the chain when it powers up.
If the disk drive is not powered at that time, the printer cannot
“see” it; even if you switch on the disk drive’s power later, the
printer will still be unable to recognize it.
If the disk drive is not powered at that time, the printer cannot
“see” it; even if you switch on the disk drive’s power later, the
printer will still be unable to recognize it.
2.
Switch power on to the printer and to the CopyStation; you can
switch them on in either order.
switch them on in either order.
9020-2
Phaser CopyStation
2