Xerox 6110MFP User Manual
5
.6
<Loading originals and print media>
Loading paper
In the tray 1
Load the print media you use for the majority of your print jobs in the tray
1. The tray 1 can hold a maximum of 150 sheets of 20 lb plain paper.
1. The tray 1 can hold a maximum of 150 sheets of 20 lb plain paper.
You can purchase an optional tray 2 and attach it below the tray 1 to load
an additional 250 sheets of paper. For order information for an optional
optional tray 2, see page 12.1.
an additional 250 sheets of paper. For order information for an optional
optional tray 2, see page 12.1.
Loading paper in the tray 1
1
Pull the tray out of the machine.
2
Open the paper cover.
3
Adjust the size of tray until it sound click.
4
Enlarge the tray by adjusting the paper width guide.
5
Flex the paper sheets back and forth to separate pages and then
fan them while holding one edge. Tap the edges of the stack on a
flat surface to even it up.
fan them while holding one edge. Tap the edges of the stack on a
flat surface to even it up.
6
Load paper with the print side up.
Make sure not to overfill the tray and that all four corners are flat in
the tray and under the brackets, as shown below. Overfilling the
tray may cause a paper jam.
the tray and under the brackets, as shown below. Overfilling the
tray may cause a paper jam.
7
Squeeze the paper length guide and slide in it until it lightly touches
the end of the paper stack.
the end of the paper stack.