Xerox 6110MFP User Manual

.8   

<Loading originals and print media>

For paper smaller than Letter-sized, return the paper guides to their 
original positions and adjust the paper length guide and paper width 
guide.

Close the paper cover.

Slide the tray 1 back into the machine.

• Do not push the paper width guides far enough to cause the 

material to warp.

• If you do not correctly adjust the paper width guides, it may 

cause paper jams.

The manual feeder can hold special sizes and types of print material, 
such as transparencies, postcards, note cards, labels, and envelopes. It 
is useful for single page printing on letterhead or coloured paper. 

To load paper in the manual feeder:

Load the paper with the side to be printed on facing up.

Depending on the media type you are using, keep the following 
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top left 

side.

• Transparencies: Print side up and the top with the adhesive strip 

entering the machine first.

• Labels: Print side up and top short edge entering the machine 

first.

• Preprinted paper: Design side up with the top edge toward the 

machine.

• Card stock: Print side up and the short edge entering the machine 

first.

• Previously printed paper: Previously printed side down with an 

uncurled edge toward the machine.

• When you do the printing job from the manual feeder, clear the 

paper in the tray 1 away.