Xerox PE120 User Manual
Using USB Flash Drive
10.4
2
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
port in the front of the machine. If necessary, insert the
flash drive. See page 10.2.
3
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
4
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
5
Press Enter to start scanning. The scanned image is saved
on the USB flash drive.
on the USB flash drive.
6
When a document is loaded on the document glass, the
display shows “Another Page?” on the top line after the
display shows “Another Page?” on the top line after the
page has been scanned into memory. If you have another
page, remove the scanned page and place the next page on
the glass. Select “Yes” Repeat as necessary.
After all of the pages have been scanned, select “No” when
the display asks “Another Page?”
7
To return to Standby mode, press Stop/Clear.
Scanning With Your Own Settings
1
Load the document face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
2
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
port in the front of the machine. If necessary, insert the
flash drive. See page 10.2.
3
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.